Pests, as the name suggests, are annoying and ugly creatures. They are small, but can cause significant disruption to your home and health. They leave behind bacteria that cause diseases, and it is sometimes hard to detect the cause when one is unaware of the dangers of these creatures. There are several ways to inspect and get rid of them. The pest examiners in Surrey can help identify and eliminate pests. Some of the ways used to inspect these are visual inspection, tools that detect hidden pests, entry points, and damage assessment, and specialized detection devices. There are various types of pests, ways to prevent and get rid of them. You can find it all described below.
Common Types of Pests
Subterranean Termites – These mud-loving insects are mostly found where wood is present in house or office spaces. They find a line of weakness in the house where there are cracks and find their way underground, digging deep in the soil. They often come to the surface in search of wood. They can chow on any type of wood they find and multiply in no time. Below are the signs by which these termites can be detected.
Sign of Presence
- Buckling wood
- Swollen floors and ceilings
- Mud tubes
- Droppings
- Winged termites
- Moldy smell
- Mildewy smell
Drywood Termites – They are insects or pests that chow on dry, sound wood. They do not need to be on the ground or have access to soil or mud to operate and multiply. They just need the wood and can devor it on the surface, and it doesn’t matter if it is far from the ground. They usually reside inside dry walls and dry parts of the wood.
Signs of Presence
- Cracks on wood surfaces
- Pellet droppings
- Termite wings on the floor
- Sealed wood openings with mud
How the Pests Are Detected
Pest inspection experts detect the presence of pests in various ways. Depending on the type of affected area and the infected surface, they conduct the test with different kinds of tools. For instance, if the termites infest the wood, they conduct a tapping test to check for hollows. Many other inspection methods are detailed below.
Home Walk Home Walkaround – Inspect foundation walls, crawl spaces, eaves, window sills, door frames, plumbing areas, and attached wood structures for tubes, mud, paint damage, and exit holes.
Tap Test – A gentle knock on the wood would determine if there is the presence of termites or not. Since the insects chow on wood, while tapping, if the wood sounds hollow, they are present; if not, they are not there.
Noise Check – Quiet the space, then listen for subtle clicking or chewing inside the walls.
Check for Wings – Inspect light sources and sills for discarded termite wings during spring swarming.
Target Moisture Zones – Pay special attention to damp areas near plumbing, leaking roofs, or poorly ventilated crawl spaces.
Active Verification – Break mud tubes; if termites repair them quickly, there’s an active infestation.
Elimination
- Heat and cold fumigation
- Targeted treatments and traps
- Biological and natural control
- Exclusion barriers
- Physical barriers
- Sanitation and habitat reduction
In conclusion, if you are facing challenges related to pests, Contact experts who can get rid of all kinds of pests. They know how to detect any types of pests and the methods that fit the infestation best.
Read Also: Ways to Select a Good Pest Control Company
Leave A Reply